单片机源文件万年历

ID:326672 · 发表于 2018-5-10 11:16

#include<AT89X51.h>
unsigned char code dispcode[]={0x3F,0x06,0x5B,0x4F,0x66,0x6D,0x7D,0x07,0x7F,0x6F,0x40};//共阴极
unsigned char dispbitcode[]={0x00,0x21,0x42,0x63,0x84,0xA5,0xC6,0xE7};//管子的选择
unsigned char dispbuf[8]={0,0,10,0,0,10,2,1}; //16为显示间断号符
unsigned char dispbym[8]={1,2,7,0,6,0,0,2};
unsigned char dispbitcnt;
unsigned char second;
unsigned char minite;
unsigned char hour;
unsigned char day;
unsigned char month;
unsigned char yearh;
unsigned char yearl;
unsigned int tcnt;
unsigned char mstcnt;
unsigned char i,j;
void main(void)
{
TMOD=0x02;                   //设置模式为定时器T0的模式2 （8位自动重装计数初值的计数值）
TH0=0x06;                   //设置计数器初值，靠TH0存储重装的计数值X0=256-250=6
TL0=0x06;
TR0=1;             //启动T0
ET0=1;             //开启定时器T0中断允许
EA=1;                //开启中断总控制
yearh=20;
yearl=6;
month=7;
day=21;
hour=12;             //初始值为12:00:00
while(1)
{
  if(P0_0==0)             //扫描秒钟按钮
  {
for(i=5;i>0;i--)          //按钮抖动消除
for(j=248;j>0;j--);    //计时
if(P0_0==0)
{
second++;
if(second==60)
{
   second=0;
}
dispbuf[0]=second%10;
dispbuf[1]=second/10;
while(P0_0==0);
}
  }

  if(P0_1==0)          //扫描分钟按钮
  {
for(i=5;i>0;i--)
for(j=248;j>0;j--);
if(P0_1==0)
{
minite++;
if(minite==60)
{
   minite=0;
}
dispbuf[3]=minite%10;
dispbuf[4]=minite/10;
while(P0_1==0);
}
  }

  if(P0_2==0)          //扫描时钟按钮
  {
for(i=5;i>0;i--)
for(j=248;j>0;j--);
if(P0_2==0)
{
hour++;
if(hour==24)
{
   hour=0;
}
dispbuf[6]=hour%10;
dispbuf[7]=hour/10;
while(P0_2==0);
}
  }

  if(P0_3==0)
  {
for(i=5;i>0;i--)
for(j=248;j>0;j--);
if(P0_3==0)
{
day++;
if(month==2&&((yearl==0&&yearh%4==0)||(yearl!=0&&yearl%4==0))&&day==30)day=1;
else if(month==2&&day==29)day=1;
else if((month==4||month==6||month==9||month==11)&&day==31)day=1;
else if(day==32)day=1;
dispbym[0]=day%10;
dispbym[1]=day/10;
while(P0_3==0);
}
  }

  if(P0_4==0)
  {
for(i=5;i>0;i--)
for(j=248;j>0;j--);
if(P0_4==0)
{
month++;
if(month==13)month=1;
dispbym[2]=month%10;
dispbym[3]=month/10;
while(P0_4==0);
}
  }

  if(P0_5==0)
  {
for(i=5;i>0;i--)
for(j=248;j>0;j--);
if(P0_5==0)
{
yearl++;
if(yearl==100)
{
   yearl=0;
   yearh++;
   if(yearh==100)yearh=20;
}
dispbym[4]=yearl%10;
dispbym[5]=yearl/10;
dispbym[6]=yearh%10;
dispbym[7]=yearh/10;
while(P0_5==0);
}
  }

}
}

void t0(void)interrupt 1 using 0 //t0的中断程序
{
mstcnt++;
if(mstcnt==8)                   //8次250us为2ms,即每隔2ms扫描一个数码管
{
  mstcnt=0;
  P1=dispcode[dispbuf[dispbitcnt]];
  P2=dispcode[dispbym[dispbitcnt]];
  P3=0xff;
  P3=dispbitcode[dispbitcnt];       //管子的选择
  dispbitcnt++;
  if(dispbitcnt==8)
  {
dispbitcnt=0;
  }
}
tcnt++;
if(tcnt==4000)                   //定时器的定时计数，4000次250us为1秒
{
  tcnt=0;
  second++;
  if(second==60)                //从秒到时层层嵌套，程序较为精练
  {
second=0;
minite++;
if(minite==60)
{
minite=0;
hour++;
if(hour==24)
{
   hour=0;
   day++;
   if(month==2&&((yearl==0&&yearh%4==0)||(yearl!=0&&yearl%4==0))&&day==30)day=1;
   else if(month==2&&day==29)day=1;
   else if((month==4||month==6||month==9||month==11)&&day==31)day=1;
   else if(day==32)day=1;
   if(day==1)
   {
   month++;
   if(month==13)
   {
   month=1;
   yearl++;
   if(yearl==100)
   {
      yearl=0;
      yearh++;
if(yearh==100)
{
   yearh=20;
}
   }
   }
   }
}
}
  }
  dispbuf[0]=second%10;       //送显示数据
  dispbuf[1]=second/10;

  dispbuf[3]=minite%10;
  dispbuf[4]=minite/10;

  dispbuf[6]=hour%10;
  dispbuf[7]=hour/10;

  dispbym[0]=day%10;
  dispbym[1]=day/10;

  dispbym[2]=month%10;
  dispbym[3]=month/10;

  dispbym[4]=yearl%10;
  dispbym[5]=yearl/10;

  dispbym[6]=yearh%10;
  dispbym[7]=yearh/10;
}
}

帐号		自动登录	找回密码
密码			立即注册