设为首页收藏本站
开启辅助访问 切换到宽版

 找回密码
 立即注册

QQ登录

只需一步，快速开始

热门： 51单片机 | 24小时必答区 | 单片机教程 | 单片机DIY制作 | STM32 | Cortex M3 | 模数电子 | 电子DIY制作 | 音响/功放 | 拆机乐园 | Arduino | 嵌入式OS | 程序设计

搜索
»论坛 › 电子技术分类讨论区 › 资料共享 › 买摇摇棒套件送的单片机程序
返回列表 发新帖
查看: 1946|回复: 1
打印 上一主题 下一主题
收起左侧

买摇摇棒套件送的单片机程序

[复制链接]
跳转到指定楼层
楼主
ID:162582 发表于 2017-6-8 15:51 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
淘宝买套件送的程序
  1. #include <AT89X52.h>
  2. #define uchar unsigned char
  3. #define uint unsigned int    //宏定义
  4. #define KEY P3_7      //定义画面切换按键
  5. uchar KY;    //KY作用在后面说明     
  6. uchar disp;     //显示汉字指针
  7. uchar pic=0,num=0;     //pic为按键次数；num为中断次数

  9. uchar code love[] = {
  10. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  11. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x3F,0x00,0x20,0x00,0x20,0x00,0x20,
  12. 0x00,0x20,0x00,0x20,0x00,0x20,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x0F,
  13. 0x04,0x10,0x02,0x20,0x02,0x20,0x02,0x20,0x02,0x20,0x04,0x10,0xF8,0x0F,0x00,0x00,
  14. 0x00,0x00,0x00,0x00,0xFE,0x07,0x00,0x08,0x00,0x10,0x00,0x20,0x00,0x20,0x00,0x10,
  15. 0x00,0x08,0xFE,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x3F,0x82,0x20,0x82,0x20,
  16. 0x82,0x20,0x82,0x20,0x82,0x20,0x82,0x20,0x82,0x20,0x00,0x00,0x00,0x00,0x00,0x00,
  17. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*LOVE*/
  18. };

  20. uchar code loveyou[] = {
  21. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  22. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  23. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  24. 0x78,0x00,0xFC,0x00,0xFE,0x01,0xFE,0x03,0xFE,0x07,0xFE,0x0F,0xFE,0x1F,0xFC,0x3F,
  25. 0xF8,0x7F,0xFC,0x3F,0xFE,0x1F,0xFE,0x0F,0xFE,0x07,0xFE,0x03,0xFE,0x01,0xFC,0x00,
  26. 0x78,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  27. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  28. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*心形图案*/
  29. };
  30. uchar code hehe[] = {
  31. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  32. 0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x01,0x40,0x01,0xC0,0x01,0x00,0x00,0x00,0x00,
  33. 0xF0,0x0F,0x08,0x10,0x04,0x20,0x00,0x00,0x00,0x00,0xF0,0x3F,0x08,0x00,0x04,0x00,
  34. 0x04,0x00,0x04,0x00,0x08,0x00,0xF0,0x3F,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x20,
  35. 0x00,0x20,0x00,0x20,0x00,0x20,0x00,0x00,0x00,0x00,0xF0,0x3F,0x08,0x00,0x04,0x00,
  36. 0x04,0x00,0x04,0x00,0x08,0x00,0xF0,0x3F,0x00,0x00,0x00,0x00,0x04,0x20,0x08,0x10,
  37. 0xF0,0x0F,0x00,0x00,0x00,0x00,0xC0,0x01,0x40,0x01,0xC0,0x01,0x00,0x00,0x00,0x00,
  38. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*呵呵o(∩_∩)o图案*/
  39. };
  40. unsigned char code hanzi[] = {
  41. //-- 欢 --
  42.       0x04,0x10,0x34,0x08,0xC4,0x06,0x04,0x01,
  43.       0xC4,0x82,0x3C,0x8C,0x20,0x40,0x10,0x30,
  44.       0x0F,0x0C,0xE8,0x03,0x08,0x0C,0x08,0x10,
  45.       0x28,0x60,0x18,0xC0,0x00,0x40,0x00,0x00,
  46. //-- 迎 --
  47.       0x40,0x00,0x42,0x40,0x44,0x20,0xC8,0x1F,
  48.       0x00,0x20,0xFC,0x47,0x04,0x42,0x02,0x41,
  49.       0x82,0x40,0xFC,0x7F,0x04,0x40,0x04,0x42,
  50.       0x04,0x44,0xFE,0x63,0x04,0x20,0x00,0x00,
  51. //-- 使 --
  52.       0x40,0x00,0x20,0x00,0xF8,0xFF,0x07,0x00,
  53.       0x04,0x80,0xF4,0x43,0x14,0x45,0x14,0x29,
  54.       0x14,0x19,0xFF,0x17,0x14,0x21,0x14,0x21,
  55.       0x14,0x41,0xF6,0xC3,0x04,0x40,0x00,0x00,
  56. //-- 用 --
  57.       0x00,0x80,0x00,0x60,0xFE,0x1F,0x22,0x02,
  58.       0x22,0x02,0x22,0x02,0x22,0x02,0xFE,0x7F,
  59.       0x22,0x02,0x22,0x02,0x22,0x42,0x22,0x82,
  60.       0xFF,0x7F,0x02,0x00,0x00,0x00,0x00,0x00,
  61. //-- 神 --
  62.       0x08,0x01,0x88,0x00,0x49,0x00,0xEE,0xFF,
  63.       0x58,0x00,0x88,0x00,0x00,0x00,0xF8,0x1F,
  64.       0x88,0x08,0x88,0x08,0xFF,0xFF,0x88,0x08,
  65.       0x88,0x08,0xFC,0x1F,0x08,0x00,0x00,0x00,
  66. //-- 奇 --
  67.       0x40,0x00,0x40,0x00,0x44,0x00,0x44,0x3E,
  68.       0x64,0x12,0x54,0x12,0x4C,0x12,0x47,0x12,
  69.       0x4C,0x3F,0x54,0x42,0x74,0x80,0xC6,0x7F,
  70.       0x44,0x00,0x60,0x00,0x40,0x00,0x00,0x00,
  71. //-- 魔 --
  72.       0x00,0x40,0x00,0x30,0xFE,0x8F,0x4A,0x80,
  73.       0xAA,0x5F,0x9A,0x4A,0xFE,0x2A,0xAA,0x1A,
  74.       0xCB,0x0F,0xAA,0x7A,0xFE,0x8A,0x9A,0xAA,
  75.       0xAA,0x8F,0x6B,0x80,0x22,0xE0,0x00,0x00,
  76. //-- 幻 --
  77.       0x80,0x20,0xC0,0x30,0xA0,0x28,0x98,0x24,
  78.       0x87,0x22,0x80,0x21,0xC4,0x30,0x04,0x60,
  79.       0x04,0x00,0x04,0x20,0x04,0x40,0x04,0x80,
  80.       0x04,0x40,0xFE,0x3F,0x04,0x00,0x00,0x00,
  81. //-- 摇 --
  82.       0x10,0x02,0x10,0x42,0x10,0x81,0xFF,0x7F,
  83.       0x90,0x04,0x54,0x05,0xCC,0xF4,0xB4,0x44,
  84.       0x84,0x44,0xBC,0x7F,0x82,0x44,0xA2,0x44,
  85.       0x9B,0xF4,0x82,0x06,0x00,0x04,0x00,0x00,
  86. //-- 摇 --
  87.       0x10,0x02,0x10,0x42,0x10,0x81,0xFF,0x7F,
  88.       0x90,0x04,0x54,0x05,0xCC,0xF4,0xB4,0x44,
  89.       0x84,0x44,0xBC,0x7F,0x82,0x44,0xA2,0x44,
  90.       0x9B,0xF4,0x82,0x06,0x00,0x04,0x00,0x00,
  91. //-- 棒 --
  92.       0x10,0x04,0x10,0x03,0xD0,0x00,0xFF,0xFF,
  93.       0x90,0x00,0x54,0x05,0x44,0x12,0xD4,0x15,
  94.       0x74,0x14,0x5F,0xFF,0xD4,0x14,0x54,0x15,
  95.       0x56,0x12,0x44,0x06,0x40,0x02,0x00,0x00,
  96. //-- ！ --
  97.       0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  98.       0x00,0x00,0x00,0x00,0x7C,0x10,0xFE,0x3B,
  99.       0xFE,0x3B,0x7C,0x10,0x00,0x00,0x00,0x00,
  100.       0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
  101. };
  102. /*****函数声明*****/
  103. void display1_ltor(void);
  104. void display2_ltor(void);
  105. void display2_rtol(void);
  106. void display3(void);
  107. void display4(void);



  111. /*****n（us）延时子程序*****/
  112. void DelayUs(uint N)
  113. {
  114. uint x;
  115. for(x=0; x<=N;x++);
  116. }
  117. /*****中断服务程序*****/
  118. void intersvr0(void) interrupt 0
  119. {
  120. ;
  121. KY=~KY;      //每个摇动来回水银开关会在摆幅两端分别产生下降沿中断，只提取其中一次（从左向右摇才显示）
  122. if(KY==0)
  123. {
  124.    num++;     //计算中断次数
  125.    switch(pic)      //选择画面
  126.    {
  127.         case 0:{display1_ltor();}break;
  128.     case 1:{display2_ltor();}break;
  129.     case 2:{display3();}break;
  130.     case 3:{display4();}break;
  131.     default:{display1_ltor();}  
  132.    }
  133. }
  134. }
  135. /*****显示子程序1（汉字）*****/
  136. void display1_ltor(void)
  137. {
  138. uchar i;
  139. if(num>10){disp++;num=0;}     //12个汉字分为3次显示完（每次显示4个），每中断10次切换
  140. if(disp>2)disp=0;
  141.   DelayUs(5200);     //此处延时时间依各硬件差别而各不相同，试着调整使得显示内容居中即可
  142. for(i=0;i<64;i++)
  143. {
  144.      P0=~hanzi[disp*128+i*2];
  145.      P2=~hanzi[disp*128+i*2+1];
  146.      DelayUs(100);
  147. }
  148. }
  149. /*****显示子程序2（LOVE）*****/
  150. void display2_ltor(void)
  151. {
  152. uchar i;
  153. DelayUs(4000);
  154. for(i=0;i<64;i++)
  155. {
  156.      P0=~love[i*2];
  157.      P2=~love[i*2+1];
  158.      DelayUs(140);
  159. }
  160. }
  161. /*****显示子程序3（心形图案）*****/
  162. void display3(void)
  163. {
  164. uchar i;
  165.   DelayUs(4000);
  166. for(i=0;i<64;i++)
  167. {
  168.      P0=~loveyou[i*2];
  169.      P2=~loveyou[i*2+1];
  170.      DelayUs(120);
  171. }
  172. }
  173. /*****显示子程序4（呵呵o(∩_∩)o图案）*****/
  174. void display4(void)
  175. {
  176. uchar i;
  177. DelayUs(4000);
  178. for(i=0;i<64;i++)
  179. {
  180.      P0=~hehe[i*2];
  181.      P2=~hehe[i*2+1];
  182.      DelayUs(120);
  183. }
  184. }
  185. /*****主函数*****/
  186. void main(void)
  187. {
  188. IT0=1;
  189. EX0=1;
  190. EA=1;      //开中断，下降沿中断
  191. KY=0;
  192. KEY=1;
  193. while(1)     //主程序中只检测按键
  194. {
  195.   if(KEY==0)     //画面切换键按下
  196.   {
  197.      DelayUs(10000);     //按键去抖
  198.      if(KEY==0);
  199.      pic++;
  200.      while(KEY==0);
  201.   }
  202.   if(pic>3)pic=0;
  203. }
  204. }
  205. /*****END*****/

复制代码


摇摇棒.rar

19.7 KB, 下载次数: 6, 下载积分: 黑币 -5

摇摇棒
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 分享淘帖 顶顶 踩踩
回复

使用道具 举报

沙发
ID:286719 发表于 2018-4-3 20:51 | 只看该作者
只有程序吗？
回复

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

手机版|小黑屋|51黑电子论坛 |51黑电子论坛6群 QQ 管理员QQ:125739409;技术交流QQ群281945664

Powered by 单片机教程网

快速回复 返回顶部 返回列表