#include<reg52.h>
#include<intrins.h>
#define uchar unsigned char
#define uint unsigned int
sbit lcden = P2^7;
sbit lcdrs = P2^6;
sbit lcdwr = P2^5;
sbit IR = P3^2;
uchar IRCOM[6];//数组，用于存储红外编码
uchar code table1[] = "remote control";
uchar code table2[] = "CODE:";
void delayms(uchar x)// 延时x*0.14ms
{
uchar i;
while(x--)
for(i=0;i<13;i++){}
}
void delay(uchar x) //延时xms
{
uchar i,j;
for(i=x;i>0;i--)
for(j=110;j>0;j--);
}
/****************************LCD部分***********************************************/
void write_com(uchar com)
{
lcden = 0;
lcdrs = 0;
lcdwr = 0;
P0 = com;
delay(5);
lcden = 1;
delay(5);
lcden = 0; //别忘了lcden拉低
}
void write_date(uchar date)
{
lcden = 0;
lcdrs = 1;
lcdwr = 0;
P0 = date;
delay(5);
lcden = 1;
delay(5);
lcden = 0;
}
void lcd_init(void)
{
lcden = 0;
lcdrs = 0;
lcdwr = 0;
delay(5);
write_com(0x38);
write_com(0x0c);
write_com(0x06);
write_com(0x01);
}
/*****************main()************************/
void main(void)
{
uchar count=0;
IR = 1;
lcd_init();
write_com(0x80);
while(table1[count]!='\0')
{
write_date(table1[count]);
count++;
delay(5);
}
count = 0;
write_com(0x80+0x40);
while(table2[count]!='\0')
{
write_date(table2[count]);
count++;
delay(5);
}
IE = 0x81; //开中断
TCON = 0x01;//脉冲负边沿触发
while(1);
}
/*********************红外中断**************************/
void IR_time() interrupt 0
{
uchar i,j,TimeNum=0;//TimeNum用来计IR高电平次数 从而判断是0还是1
EX0 = 0; //关闭中断
delayms(5);
if(1 == IR)
{
EX0 = 1;
return;
}
while(!IR) //跳过9ms前导低电平
delayms(1);
for(i=0;i<4;i++)
{
for(j=0;j<8;j++)
{
while(IR) //跳过4.5ms的前导高电平
delayms(1);
while(!IR) //跳过0.56ms的低电平
delayms(1);
while(IR)
{
TimeNum++; //计时高电平时间从而判断读取的是0还是1
delayms(1);
}
if(TimeNum>=30)//按键按下时间过长 跳过
{
EX0 = 1;
return;
}
IRCOM[i] = IRCOM[i]>>1;
if(TimeNum >= 8) //8*0.14ms 这时读取的是1；
{
IRCOM[i] = IRCOM[i]|0x80;
}
TimeNum = 0;
}
}
if(IRCOM[2]!=~IRCOM[3])//判断八位数据和八位数据反码是否相等
{
EX0 = 1;
return;
}
IRCOM[4] = IRCOM[2]&0x0f;//取低四位
IRCOM[5] = IRCOM[2]>>4; //IRCOM[5]取IRCOM[2]高四位
if(IRCOM[4] > 9) //转换成字符
{
IRCOM[4] = IRCOM[4] + 0x37;
}
else
IRCOM[4] = IRCOM[4] + 0x30;
if(IRCOM[5] > 9)
{
IRCOM[5] = IRCOM[5] + 0x37;
}
else
IRCOM[5] = IRCOM[5] + 0x30;
delay(5);
write_com(0x80 + 0x40 + 5);
write_date(IRCOM[5]);
write_date(IRCOM[4]);
EX0 = 1; //重新开启外部中断
}
|
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
收藏
淘帖
顶
踩
